2003 on Blade
Windows Server Forum Index Windows Server
Server discussion on Windows platform.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web winserverhelp.com
2003 on Blade

 
Post new topic   Reply to topic    Windows Server Forum Index -> Networking
Author Message
Michael
Guest
Posted: Sun Nov 06, 2005 9:50 pm    Post subject: 2003 on Blade Reply with quote
We have a Windows 2003 standard server installed on a blade in an IBM
Bladecenter.

Situation is we can't communicate with the network. We can ping the
loopback address and the manual IP address but when I look at the Cisco
Gigabit switch the port is not lit up and the status says Down.

We have another blade which is fine and can communicate with the network.

All ports are configured to Static Access on VLAN1.

Any ideas?
Back to top
Andrei Ungureanu
Guest
Posted: Sun Nov 06, 2005 9:50 pm    Post subject: Re: 2003 on Blade Reply with quote
can be a hardware issue.


--
Regards,
Andrei Ungureanu
www.eventid.net
Test our new EventReader beta!
http://www.altairtech.ca/eventreader/default2.asp?ref=au

"Michael" <Michael@discussions.microsoft.com> wrote in message
news:06F987DE-E3DA-4163-AEFB-DAE47104EDC2@microsoft.com...
Quote:
We have a Windows 2003 standard server installed on a blade in an IBM
Bladecenter.

Situation is we can't communicate with the network. We can ping the
loopback address and the manual IP address but when I look at the Cisco
Gigabit switch the port is not lit up and the status says Down.

We have another blade which is fine and can communicate with the network.

All ports are configured to Static Access on VLAN1.

Any ideas?
Back to top
Michael
Guest
Posted: Mon Nov 07, 2005 9:50 am    Post subject: Re: 2003 on Blade Reply with quote
Figured it out.

Thanks to all for your advice.

"Andrei Ungureanu" wrote:

Quote:
can be a hardware issue.


--
Regards,
Andrei Ungureanu
www.eventid.net
Test our new EventReader beta!
http://www.altairtech.ca/eventreader/default2.asp?ref=au

"Michael" <Michael@discussions.microsoft.com> wrote in message
news:06F987DE-E3DA-4163-AEFB-DAE47104EDC2@microsoft.com...
We have a Windows 2003 standard server installed on a blade in an IBM
Bladecenter.

Situation is we can't communicate with the network. We can ping the
loopback address and the manual IP address but when I look at the Cisco
Gigabit switch the port is not lit up and the status says Down.

We have another blade which is fine and can communicate with the network.

All ports are configured to Static Access on VLAN1.

Any ideas?


Back to top
 
Post new topic   Reply to topic    Windows Server Forum Index -> Networking All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




New Topics Powered by phpBB