| Author |
Message |
don
Guest
|
 Posted:
Fri Oct 07, 2005 12:50 pm Post subject:
second network card in sbs 2000 server |
|
|
is there any procedure i should follow before installing a second network
card in my SBS 2000 server? I am going to do this because i have just
purchased an ADSL service with an ADSL modem. |
|
| Back to top |
|
 |
Merv Porter [SBS-MVP]
Guest
|
| Posted:
Fri Oct 07, 2005 4:50 pm Post subject:
Re: second network card in sbs 2000 server |
|
|
Hi Don,
No real tricks. Shut down, physically install the second NIC, boot, install
the driver and then configure the TCP/IP properties of the second NIC.
You'll then need to re-run ICW so that you put ISA 2000 in firewall mode.
I'd recommend that you also get a cheap router. It can make troubleshooting
a bit easier and takes some of the load off the server by filtering WAN
traffic.
For setup instructions and diagrams (with or without a router), see the
proper link for your network setup on the left side of this web page:
http://www.smallbizserver.net/Default.aspx?tabid=224
And if you do decide to add a router, turn off the DHCP server on it and let
the SBS server handle all DHCP for the network.
--
Merv Porter [SBS MVP]
===================================
"don" <don@discussions.microsoft.com> wrote in message
news:B9158C2C-B8D9-4B39-A8DA-7E912EC12670@microsoft.com...
| Quote: | is there any procedure i should follow before installing a second network
card in my SBS 2000 server? I am going to do this because i have just
purchased an ADSL service with an ADSL modem. |
|
|
| Back to top |
|
|
Merv Porter [SBS-MVP]
Guest
|
| Posted:
Fri Oct 07, 2005 4:50 pm Post subject:
Re: second network card in sbs 2000 server |
|
|
And make sure you install SBS SP1a if you haven't already...
http://www.microsoft.com/sbserver/downloads/sp1a.asp
Order the CD as it will also give you Outlook 2002 and SQL SP3a.
--
Merv Porter [SBS MVP]
===================================
"Merv Porter [SBS-MVP]" <mwport@no_spam_hotmail.com> wrote in message
news:OESzvt0yFHA.2848@TK2MSFTNGP15.phx.gbl...
| Quote: | Hi Don,
No real tricks. Shut down, physically install the second NIC, boot,
install the driver and then configure the TCP/IP properties of the second
NIC. You'll then need to re-run ICW so that you put ISA 2000 in firewall
mode.
I'd recommend that you also get a cheap router. It can make
troubleshooting a bit easier and takes some of the load off the server by
filtering WAN traffic.
For setup instructions and diagrams (with or without a router), see the
proper link for your network setup on the left side of this web page:
http://www.smallbizserver.net/Default.aspx?tabid=224
And if you do decide to add a router, turn off the DHCP server on it and
let the SBS server handle all DHCP for the network.
--
Merv Porter [SBS MVP]
===================================
"don" <don@discussions.microsoft.com> wrote in message
news:B9158C2C-B8D9-4B39-A8DA-7E912EC12670@microsoft.com...
is there any procedure i should follow before installing a second network
card in my SBS 2000 server? I am going to do this because i have just
purchased an ADSL service with an ADSL modem.
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in