| Author |
Message |
Jakes IV
Guest
|
 Posted:
Mon Nov 15, 2004 1:51 pm Post subject:
The node type indicated on an XID3 received from an adjacent |
|
|
I have installed HIS 2004 , our network specialist defined the Enterprise
exterder in z/OS. I have defined I IP/DLC link on HIS but keep on getting the
following error:
The node type indicated on an XID3 received from an adjacent node is
different to that expected
Sense code = 0x08090054
Port name = IPPORT00
LS name = @N000001
Received node type = 03
Cant find any help on Microsoft, does anyone know what I need to do to get
HIS working. |
|
| Back to top |
|
 |
Stephen Jackson [MSFT]
Guest
|
| Posted:
Tue Nov 16, 2004 3:41 am Post subject:
Re: The node type indicated on an XID3 received from an adja |
|
|
You might want to download the IP DLC white paper at the following link to
verify the configuration:
http://download.microsoft.com/download/a/f/f/affdc2aa-63ca-48c7-9431-c50736f24236/Configuring%20IP-DLC%20Link%20Service%20for%20IBM%20Enterprise%20Extender.doc
--
Stephen Jackson
Microsoft® SNA/HIS Support
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only. This posting is provided "AS IS"
with no warranties, and confers no rights.
"Jakes IV" <JakesIV@discussions.microsoft.com> wrote in message
news:B5FE1554-3BCA-427D-A12E-1838FBA0DD84@microsoft.com...
| Quote: | I have installed HIS 2004 , our network specialist defined the Enterprise
exterder in z/OS. I have defined I IP/DLC link on HIS but keep on getting
the
following error:
The node type indicated on an XID3 received from an adjacent node is
different to that expected
Sense code = 0x08090054
Port name = IPPORT00
LS name = @N000001
Received node type = 03
Cant find any help on Microsoft, does anyone know what I need to do to get
HIS working.
|
|
|
| Back to top |
|
|
Jakes IV
Guest
|
| Posted:
Mon Nov 22, 2004 2:23 pm Post subject:
Re: The node type indicated on an XID3 received from an adja |
|
|
Hi Stephen
We used that whitepaper to setup the HIS and VTAM environment. We beleive
after bouncing VTAM this weekend we no longer get the XID3 problem. We now
get:
"APPC session activation failure: BIND negative response or UNBIND request
received
"
Before this error I receive error that remote LU was not found. This is not
possible as we are using the previous SNA 4 remote LU. This interface is
still up and running using the same remote LU.
"Stephen Jackson [MSFT]" wrote:
| Quote: | You might want to download the IP DLC white paper at the following link to
verify the configuration:
http://download.microsoft.com/download/a/f/f/affdc2aa-63ca-48c7-9431-c50736f24236/Configuring%20IP-DLC%20Link%20Service%20for%20IBM%20Enterprise%20Extender.doc
--
Stephen Jackson
Microsoft® SNA/HIS Support
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only. This posting is provided "AS IS"
with no warranties, and confers no rights.
"Jakes IV" <JakesIV@discussions.microsoft.com> wrote in message
news:B5FE1554-3BCA-427D-A12E-1838FBA0DD84@microsoft.com...
I have installed HIS 2004 , our network specialist defined the Enterprise
exterder in z/OS. I have defined I IP/DLC link on HIS but keep on getting
the
following error:
The node type indicated on an XID3 received from an adjacent node is
different to that expected
Sense code = 0x08090054
Port name = IPPORT00
LS name = @N000001
Received node type = 03
Cant find any help on Microsoft, does anyone know what I need to do to get
HIS working.
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in