| Author |
Message |
lonegijoe
Guest
|
 Posted:
Wed Jan 05, 2005 8:03 am Post subject:
!!!! Important- MESSENGER ERROR !!! |
|
|
NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts include users
of sip is checked. clicked on advanced and configure settings. manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to add
another use
to contact list but am getting error & keep getting contact list invite from
another user but after clicking on ok to allow user to be added to list I am
getting error "username could not be unblocked. please try again later."
I also can not im any other users. it sends message but comes back saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc and have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow. |
|
| Back to top |
|
 |
Dhigha D Sekara
Guest
|
| Posted:
Wed Jan 05, 2005 4:31 pm Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
All the symtoms point to the fact that you have an LCS 2005 EE version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
| Quote: | NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts include
users
of sip is checked. clicked on advanced and configure settings. manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to add
another use
to contact list but am getting error & keep getting contact list invite
from
another user but after clicking on ok to allow user to be added to list I
am
getting error "username could not be unblocked. please try again later."
I also can not im any other users. it sends message but comes back saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc and have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow. |
|
|
| Back to top |
|
|
lonegijoe
Guest
|
| Posted:
Wed Jan 05, 2005 8:23 pm Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
| Quote: | All the symtoms point to the fact that you have an LCS 2005 EE version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts include
users
of sip is checked. clicked on advanced and configure settings. manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to add
another use
to contact list but am getting error & keep getting contact list invite
from
another user but after clicking on ok to allow user to be added to list I
am
getting error "username could not be unblocked. please try again later."
I also can not im any other users. it sends message but comes back saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc and have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
toml@online.microsoft.com
Guest
|
| Posted:
Wed Jan 05, 2005 9:35 pm Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
You will want to gather a network capture from the client or generate the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you restart a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com>
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com>
<uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl>
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
| Quote: | All the symtoms point to the fact that you have an LCS 2005 EE version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts include
users
of sip is checked. clicked on advanced and configure settings. manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to add
another use
to contact list but am getting error & keep getting contact list
invite
from
another user but after clicking on ok to allow user to be added to list
I
am
getting error "username could not be unblocked. please try again later."
I also can not im any other users. it sends message but comes back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
lonegijoe
Guest
|
| Posted:
Wed Jan 05, 2005 10:49 pm Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
and then?
I need specific instructions. Trying to understand why it doesn't work after
I followed all the instructions from microsoft.com/livecomm step by step.
""Tom Laciano <MSFT>"" wrote:
| Quote: | You will want to gather a network capture from the client or generate the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you restart a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts include
users
of sip is checked. clicked on advanced and configure settings. manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to add
another use
to contact list but am getting error & keep getting contact list
invite
from
another user but after clicking on ok to allow user to be added to list
I
am
getting error "username could not be unblocked. please try again later."
I also can not im any other users. it sends message but comes back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
toml@online.microsoft.com
Guest
|
| Posted:
Wed Jan 05, 2005 11:32 pm Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
Next step: send the log file.
Given what you are describing and the fact that it is not what Dhigha
suspects, we will want to see the log and view the conversation to see if
that give further details.
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzRntN49UuqQYzShyDHdQvcUcMjQ==
X-WBNR-Posting-Host: 131.15.48.58
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com>
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com>
<uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl>
<1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com>
<5QJ4avz8EHA.2680@cpmsftngxa10.phx.gbl>
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 08:49:11 -0800
Lines: 96
Message-ID: <CFF47E39-DFD0-40ED-BA2F-14E92C66D617@microsoft.com>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5034
X-Tomcat-NG: microsoft.public.livecomm.general
and then?
I need specific instructions. Trying to understand why it doesn't work
after
I followed all the instructions from microsoft.com/livecomm step by step.
""Tom Laciano <MSFT>"" wrote:
| Quote: | You will want to gather a network capture from the client or generate the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you restart
a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND
ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts include
users
of sip is checked. clicked on advanced and configure settings.
manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to add
another use
to contact list but am getting error & keep getting contact list
invite
from
another user but after clicking on ok to allow user to be added to
list
I
am
getting error "username could not be unblocked. please try again
later."
I also can not im any other users. it sends message but comes back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
lonegijoe
Guest
|
| Posted:
Thu Jan 06, 2005 1:33 am Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
when i tried to go to [HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
so i can get the logI ran into a problem. after mircosoft I have no tracing.
Should i need to
create it or shouldn't it already be there?
""Tom Laciano <MSFT>"" wrote:
| Quote: | Next step: send the log file.
Given what you are describing and the fact that it is not what Dhigha
suspects, we will want to see the log and view the conversation to see if
that give further details.
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzRntN49UuqQYzShyDHdQvcUcMjQ==
X-WBNR-Posting-Host: 131.15.48.58
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
5QJ4avz8EHA.2680@cpmsftngxa10.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 08:49:11 -0800
Lines: 96
Message-ID: <CFF47E39-DFD0-40ED-BA2F-14E92C66D617@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5034
X-Tomcat-NG: microsoft.public.livecomm.general
and then?
I need specific instructions. Trying to understand why it doesn't work
after
I followed all the instructions from microsoft.com/livecomm step by step.
""Tom Laciano <MSFT>"" wrote:
You will want to gather a network capture from the client or generate the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you restart
a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND
ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts include
users
of sip is checked. clicked on advanced and configure settings.
manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to add
another use
to contact list but am getting error & keep getting contact list
invite
from
another user but after clicking on ok to allow user to be added to
list
I
am
getting error "username could not be unblocked. please try again
later."
I also can not im any other users. it sends message but comes back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
Dhigha D Sekara
Guest
|
| Posted:
Thu Jan 06, 2005 4:00 am Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
Can you see if it is under HKEY_LOCAL_MACHINE
thanks..
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:78C3470D-6149-4F90-982B-A977AC0181DC@microsoft.com...
| Quote: | when i tried to go to
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
so i can get the logI ran into a problem. after mircosoft I have no
tracing.
Should i need to
create it or shouldn't it already be there?
""Tom Laciano <MSFT>"" wrote:
Next step: send the log file.
Given what you are describing and the fact that it is not what Dhigha
suspects, we will want to see the log and view the conversation to see if
that give further details.
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzRntN49UuqQYzShyDHdQvcUcMjQ==
X-WBNR-Posting-Host: 131.15.48.58
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
5QJ4avz8EHA.2680@cpmsftngxa10.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 08:49:11 -0800
Lines: 96
Message-ID: <CFF47E39-DFD0-40ED-BA2F-14E92C66D617@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5034
X-Tomcat-NG: microsoft.public.livecomm.general
and then?
I need specific instructions. Trying to understand why it doesn't work
after
I followed all the instructions from microsoft.com/livecomm step by step.
""Tom Laciano <MSFT>"" wrote:
You will want to gather a network capture from the client or generate
the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you
restart
a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE
version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this
newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND
ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts
include
users
of sip is checked. clicked on advanced and configure settings.
manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to
add
another use
to contact list but am getting error & keep getting contact list
invite
from
another user but after clicking on ok to allow user to be added to
list
I
am
getting error "username could not be unblocked. please try again
later."
I also can not im any other users. it sends message but comes back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc
and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
lonegijoe
Guest
|
| Posted:
Thu Jan 06, 2005 4:45 am Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
looked in HKEY_LOCAL_MACHINE_SOFTWARE_MICROSOFT_TRACING and there is no RTC
DLL. ????
Actually it should be me thanking you for helping. I areally appreciate it.
Joe
"Dhigha D Sekaran<msft>" wrote:
| Quote: | Can you see if it is under HKEY_LOCAL_MACHINE
thanks..
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:78C3470D-6149-4F90-982B-A977AC0181DC@microsoft.com...
when i tried to go to
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
so i can get the logI ran into a problem. after mircosoft I have no
tracing.
Should i need to
create it or shouldn't it already be there?
""Tom Laciano <MSFT>"" wrote:
Next step: send the log file.
Given what you are describing and the fact that it is not what Dhigha
suspects, we will want to see the log and view the conversation to see if
that give further details.
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzRntN49UuqQYzShyDHdQvcUcMjQ==
X-WBNR-Posting-Host: 131.15.48.58
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
5QJ4avz8EHA.2680@cpmsftngxa10.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 08:49:11 -0800
Lines: 96
Message-ID: <CFF47E39-DFD0-40ED-BA2F-14E92C66D617@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5034
X-Tomcat-NG: microsoft.public.livecomm.general
and then?
I need specific instructions. Trying to understand why it doesn't work
after
I followed all the instructions from microsoft.com/livecomm step by step.
""Tom Laciano <MSFT>"" wrote:
You will want to gather a network capture from the client or generate
the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you
restart
a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE
version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this
newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE RESPOND
ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts
include
users
of sip is checked. clicked on advanced and configure settings.
manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able to
add
another use
to contact list but am getting error & keep getting contact list
invite
from
another user but after clicking on ok to allow user to be added to
list
I
am
getting error "username could not be unblocked. please try again
later."
I also can not im any other users. it sends message but comes back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the blogs,newsgroups,etc
and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
Dhigha D Sekara
Guest
|
| Posted:
Thu Jan 06, 2005 5:19 am Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
What is the client version you are using?
If you have WM 5.1 installed then the following regkey will be there..
HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL
or
HKEY_LOCAL_MACHINE\Software\Microsoft\Tracing\RTCDLL
Thanks,
Dhigha
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:6A21F1D5-7925-450D-8CA5-DEFAD18F3AE7@microsoft.com...
| Quote: | looked in HKEY_LOCAL_MACHINE_SOFTWARE_MICROSOFT_TRACING and there is no
RTC
DLL. ????
Actually it should be me thanking you for helping. I areally appreciate
it.
Joe
"Dhigha D Sekaran<msft>" wrote:
Can you see if it is under HKEY_LOCAL_MACHINE
thanks..
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:78C3470D-6149-4F90-982B-A977AC0181DC@microsoft.com...
when i tried to go to
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
so i can get the logI ran into a problem. after mircosoft I have no
tracing.
Should i need to
create it or shouldn't it already be there?
""Tom Laciano <MSFT>"" wrote:
Next step: send the log file.
Given what you are describing and the fact that it is not what Dhigha
suspects, we will want to see the log and view the conversation to see
if
that give further details.
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzRntN49UuqQYzShyDHdQvcUcMjQ==
X-WBNR-Posting-Host: 131.15.48.58
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
5QJ4avz8EHA.2680@cpmsftngxa10.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 08:49:11 -0800
Lines: 96
Message-ID: <CFF47E39-DFD0-40ED-BA2F-14E92C66D617@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5034
X-Tomcat-NG: microsoft.public.livecomm.general
and then?
I need specific instructions. Trying to understand why it doesn't work
after
I followed all the instructions from microsoft.com/livecomm step by
step.
""Tom Laciano <MSFT>"" wrote:
You will want to gather a network capture from the client or
generate
the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you
restart
a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE
version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers
no
rights.
Please do not send email to this address, post a reply to this
newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE
RESPOND
ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts
include
users
of sip is checked. clicked on advanced and configure settings.
manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able
to
add
another use
to contact list but am getting error & keep getting contact
list
invite
from
another user but after clicking on ok to allow user to be added
to
list
I
am
getting error "username could not be unblocked. please try again
later."
I also can not im any other users. it sends message but comes
back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the
blogs,newsgroups,etc
and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
lonegijoe
Guest
|
| Posted:
Thu Jan 06, 2005 8:21 pm Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
using messenger client 5.1.
changed enable file tracing to 1 on clientside.As luck would have it I can
not log into messenger using sip. keeps saying sip service failed because
username,password,is incorrect or authentication service is not
compatible.????? Another teammate just had the same thing happen to him
!!!?????
Now were getting an error" you have been signed out of sip messenger service
because that service has been temporarily shut down.????
Then I restarted messenger service and now it let me log on.
I think we're going to completely reinstall lCS 2005.???
"Dhigha D Sekaran<msft>" wrote:
| Quote: | What is the client version you are using?
If you have WM 5.1 installed then the following regkey will be there..
HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL
or
HKEY_LOCAL_MACHINE\Software\Microsoft\Tracing\RTCDLL
Thanks,
Dhigha
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:6A21F1D5-7925-450D-8CA5-DEFAD18F3AE7@microsoft.com...
looked in HKEY_LOCAL_MACHINE_SOFTWARE_MICROSOFT_TRACING and there is no
RTC
DLL. ????
Actually it should be me thanking you for helping. I areally appreciate
it.
Joe
"Dhigha D Sekaran<msft>" wrote:
Can you see if it is under HKEY_LOCAL_MACHINE
thanks..
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:78C3470D-6149-4F90-982B-A977AC0181DC@microsoft.com...
when i tried to go to
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
so i can get the logI ran into a problem. after mircosoft I have no
tracing.
Should i need to
create it or shouldn't it already be there?
""Tom Laciano <MSFT>"" wrote:
Next step: send the log file.
Given what you are describing and the fact that it is not what Dhigha
suspects, we will want to see the log and view the conversation to see
if
that give further details.
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzRntN49UuqQYzShyDHdQvcUcMjQ==
X-WBNR-Posting-Host: 131.15.48.58
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
5QJ4avz8EHA.2680@cpmsftngxa10.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 08:49:11 -0800
Lines: 96
Message-ID: <CFF47E39-DFD0-40ED-BA2F-14E92C66D617@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5034
X-Tomcat-NG: microsoft.public.livecomm.general
and then?
I need specific instructions. Trying to understand why it doesn't work
after
I followed all the instructions from microsoft.com/livecomm step by
step.
""Tom Laciano <MSFT>"" wrote:
You will want to gather a network capture from the client or
generate
the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you
restart
a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?= <lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE
version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers
no
rights.
Please do not send email to this address, post a reply to this
newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE
RESPOND
ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts
include
users
of sip is checked. clicked on advanced and configure settings.
manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am able
to
add
another use
to contact list but am getting error & keep getting contact
list
invite
from
another user but after clicking on ok to allow user to be added
to
list
I
am
getting error "username could not be unblocked. please try again
later."
I also can not im any other users. it sends message but comes
back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the
blogs,newsgroups,etc
and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
Dhigha D Sekara
Guest
|
| Posted:
Fri Jan 07, 2005 5:41 am Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
Does your server have multiple NICs with two IP addresses?
There was a similar issue with symptoms similar to yours which seems to be
because of multiple nics.
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:63BBFD21-14AA-4CBE-9EC8-E07CEDCE9F39@microsoft.com...
| Quote: | using messenger client 5.1.
changed enable file tracing to 1 on clientside.As luck would have it I can
not log into messenger using sip. keeps saying sip service failed because
username,password,is incorrect or authentication service is not
compatible.????? Another teammate just had the same thing happen to him
!!!?????
Now were getting an error" you have been signed out of sip messenger
service
because that service has been temporarily shut down.????
Then I restarted messenger service and now it let me log on.
I think we're going to completely reinstall lCS 2005.???
"Dhigha D Sekaran<msft>" wrote:
What is the client version you are using?
If you have WM 5.1 installed then the following regkey will be there..
HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL
or
HKEY_LOCAL_MACHINE\Software\Microsoft\Tracing\RTCDLL
Thanks,
Dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:6A21F1D5-7925-450D-8CA5-DEFAD18F3AE7@microsoft.com...
looked in HKEY_LOCAL_MACHINE_SOFTWARE_MICROSOFT_TRACING and there is no
RTC
DLL. ????
Actually it should be me thanking you for helping. I areally appreciate
it.
Joe
"Dhigha D Sekaran<msft>" wrote:
Can you see if it is under HKEY_LOCAL_MACHINE
thanks..
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this
newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:78C3470D-6149-4F90-982B-A977AC0181DC@microsoft.com...
when i tried to go to
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
so i can get the logI ran into a problem. after mircosoft I have no
tracing.
Should i need to
create it or shouldn't it already be there?
""Tom Laciano <MSFT>"" wrote:
Next step: send the log file.
Given what you are describing and the fact that it is not what
Dhigha
suspects, we will want to see the log and view the conversation to
see
if
that give further details.
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzRntN49UuqQYzShyDHdQvcUcMjQ==
X-WBNR-Posting-Host: 131.15.48.58
From: =?Utf-8?B?bG9uZWdpam9l?=
lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
5QJ4avz8EHA.2680@cpmsftngxa10.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 08:49:11 -0800
Lines: 96
Message-ID: <CFF47E39-DFD0-40ED-BA2F-14E92C66D617@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5034
X-Tomcat-NG: microsoft.public.livecomm.general
and then?
I need specific instructions. Trying to understand why it doesn't
work
after
I followed all the instructions from microsoft.com/livecomm step by
step.
""Tom Laciano <MSFT>"" wrote:
You will want to gather a network capture from the client or
generate
the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you
restart
a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?=
lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE
version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and
confers
no
rights.
Please do not send email to this address, post a reply to this
newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in
message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE
RESPOND
ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my contacts
include
users
of sip is checked. clicked on advanced and configure
settings.
manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am
able
to
add
another use
to contact list but am getting error & keep getting contact
list
invite
from
another user but after clicking on ok to allow user to be
added
to
list
I
am
getting error "username could not be unblocked. please try
again
later."
I also can not im any other users. it sends message but comes
back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the
blogs,newsgroups,etc
and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
Dhigha D Sekara
Guest
|
| Posted:
Fri Jan 14, 2005 2:10 pm Post subject:
Re: !!!! Important- MESSENGER ERROR !!! |
|
|
this the error get fixed for you?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this address, post a reply to this newsgroup
"Dhigha D Sekaran<msft>" <dhigha@online.microsoft.com> wrote in message
news:um3%23PlE9EHA.3944@TK2MSFTNGP12.phx.gbl...
| Quote: | Does your server have multiple NICs with two IP addresses?
There was a similar issue with symptoms similar to yours which seems to be
because of multiple nics.
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:63BBFD21-14AA-4CBE-9EC8-E07CEDCE9F39@microsoft.com...
using messenger client 5.1.
changed enable file tracing to 1 on clientside.As luck would have it I
can
not log into messenger using sip. keeps saying sip service failed because
username,password,is incorrect or authentication service is not
compatible.????? Another teammate just had the same thing happen to him
!!!?????
Now were getting an error" you have been signed out of sip messenger
service
because that service has been temporarily shut down.????
Then I restarted messenger service and now it let me log on.
I think we're going to completely reinstall lCS 2005.???
"Dhigha D Sekaran<msft>" wrote:
What is the client version you are using?
If you have WM 5.1 installed then the following regkey will be there..
HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL
or
HKEY_LOCAL_MACHINE\Software\Microsoft\Tracing\RTCDLL
Thanks,
Dhigha
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:6A21F1D5-7925-450D-8CA5-DEFAD18F3AE7@microsoft.com...
looked in HKEY_LOCAL_MACHINE_SOFTWARE_MICROSOFT_TRACING and there is
no
RTC
DLL. ????
Actually it should be me thanking you for helping. I areally
appreciate
it.
Joe
"Dhigha D Sekaran<msft>" wrote:
Can you see if it is under HKEY_LOCAL_MACHINE
thanks..
--
This posting is provided "AS IS" with no warranties, and confers no
rights.
Please do not send email to this address, post a reply to this
newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in message
news:78C3470D-6149-4F90-982B-A977AC0181DC@microsoft.com...
when i tried to go to
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
so i can get the logI ran into a problem. after mircosoft I have no
tracing.
Should i need to
create it or shouldn't it already be there?
""Tom Laciano <MSFT>"" wrote:
Next step: send the log file.
Given what you are describing and the fact that it is not what
Dhigha
suspects, we will want to see the log and view the conversation to
see
if
that give further details.
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzRntN49UuqQYzShyDHdQvcUcMjQ==
X-WBNR-Posting-Host: 131.15.48.58
From: =?Utf-8?B?bG9uZWdpam9l?=
lonegijoe@discussions.microsoft.com
References: <10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
5QJ4avz8EHA.2680@cpmsftngxa10.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 08:49:11 -0800
Lines: 96
Message-ID: <CFF47E39-DFD0-40ED-BA2F-14E92C66D617@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl microsoft.public.livecomm.general:5034
X-Tomcat-NG: microsoft.public.livecomm.general
and then?
I need specific instructions. Trying to understand why it doesn't
work
after
I followed all the instructions from microsoft.com/livecomm step
by
step.
""Tom Laciano <MSFT>"" wrote:
You will want to gather a network capture from the client or
generate
the
RTCDLL log for messenger.
[HKEY_CURRENT_USER\Software\Microsoft\Tracing\RTCDLL]
"EnableFileTracing"=dword:1
"FileDirectory"= C:You have to EXIT the WM5 client, and when you
restart
a
file with the name RTCDLL*.log
TomL
--------------------
Thread-Topic: !!!! Important- MESSENGER ERROR !!!
thread-index: AcTzMhKG289s7LTHQkeJBit8GDJxIA==
X-WBNR-Posting-Host: 131.15.48.59
From: =?Utf-8?B?bG9uZWdpam9l?=
lonegijoe@discussions.microsoft.com
References:
10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com
uAtIuGx8EHA.1260@TK2MSFTNGP12.phx.gbl
Subject: Re: !!!! Important- MESSENGER ERROR !!!
Date: Wed, 5 Jan 2005 06:23:05 -0800
Lines: 47
Message-ID: <1238BBFA-11BE-4938-9D1E-493012F9A2DD@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.livecomm.general
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.1.29
Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: cpmsftngxa10.phx.gbl
microsoft.public.livecomm.general:5021
X-Tomcat-NG: microsoft.public.livecomm.general
Running LCS 2005 SE not EE
"Dhigha D Sekaran<msft>" wrote:
All the symtoms point to the fact that you have an LCS 2005 EE
version
installed and dont have the pool FQDN published in the DNS.
Can you please verify that?
thanks,
dhigha
--
This posting is provided "AS IS" with no warranties, and
confers
no
rights.
Please do not send email to this address, post a reply to this
newsgroup
"lonegijoe" <lonegijoe@discussions.microsoft.com> wrote in
message
news:10EC7874-1B8E-4277-B96B-50C475D59C17@microsoft.com...
NEED HELP RIGHT AWAY. Working on important project. PLEASE
RESPOND
ASAP.
LCS 2005 SE. Using TCP.
Have already checked to make sure in options that my
contacts
include
users
of sip is checked. clicked on advanced and configure
settings.
manually
entered ip and selected tcp.
I restarted messenger for probably 15th time and now I am
able
to
add
another use
to contact list but am getting error & keep getting contact
list
invite
from
another user but after clicking on ok to allow user to be
added
to
list
I
am
getting error "username could not be unblocked. please try
again
later."
I also can not im any other users. it sends message but
comes
back
saying
"could not reach all participants blah blah."???
any suggestions? I've been searching all the
blogs,newsgroups,etc
and
have
not been able to find any fixes. Thanks man
joe
sorry if i reposted. My system is slow.
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in