Jerry
Guest
|
 Posted:
Mon Nov 14, 2005 5:50 pm Post subject:
Pending Installations |
|
|
I have a network with 3 domains/3 configuration groups across the enterprise
composing of 4 DCAMs in each configuration group. I have set the DCAMs to
scan every 2 days 15 minutes apart. My issue is that sometimes, with
inconsistency, 50 -100 servers show up in the Pending Installations folder in
the MOM console. After I run a manual scan the pending installations go
away. THis seems to be from one DCAM at random across the 3 domains. As I
understand the DCAM will allow 50 seconds for a server to respond and scan
for a total of 15 minutes.
I there a way to change these settings to allow the DCAm longer to scan and
allow longer for the Server response time > 50 seconds. Also, is some way to
find out when a DCAM starts and when it stops scanning.
Any assistance on some undocumented settings would be greatly appreciated.
Thanks in advance for advice.
--
Jerry |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in