| Author |
Message |
Shahin
Guest
|
 Posted:
Fri Nov 04, 2005 1:50 pm Post subject:
Useing MOM workgroup between Domains. |
|
|
have a questions.
I have installed MOM 2005 and want to install an agent on a server that is
not in the current domain where MOM was installed.
Example:
MOM Installed on a server (single server installation) on domain1 (Windows
2003 Server with latest service packs).
Agent need to be installed on server that is on domain2 (windows 2003 Server
with latest service packs).
The user that I am using is having the administrator level permissions on
both the servers.
When I install the agents in the same domain (in my case domain1), they get
installed successfully. On installation of agent on server that is on domain2
I get the following error
The MOM Server failed to install agent on remote computer <computername>.
Error Code: -2147467259
Error Description: The Agent could not contact the MOM Server.
Microsoft Installer Error Description: No Description Available
There is no firewall between the computers.
how should i do this?
Thanks,
Shahin |
|
| Back to top |
|
 |
Arie de Haan
Guest
|
| Posted:
Fri Nov 04, 2005 1:50 pm Post subject:
Re: Useing MOM workgroup between Domains. |
|
|
In article <A7C0E2F1-E440-47B0-8FDB-BCCEDB89C4AA@microsoft.com>,
Shahin@discussions.microsoft.com says...
| Quote: | have a questions.
I have installed MOM 2005 and want to install an agent on a server that is
not in the current domain where MOM was installed.
Example:
MOM Installed on a server (single server installation) on domain1 (Windows
2003 Server with latest service packs).
Agent need to be installed on server that is on domain2 (windows 2003 Server
with latest service packs).
The user that I am using is having the administrator level permissions on
both the servers.
When I install the agents in the same domain (in my case domain1), they get
installed successfully. On installation of agent on server that is on domain2
I get the following error
The MOM Server failed to install agent on remote computer <computername>.
Error Code: -2147467259
Error Description: The Agent could not contact the MOM Server.
Microsoft Installer Error Description: No Description Available
There is no firewall between the computers.
how should i do this?
Thanks,
Shahin
Try making it a manual install, so use the MOM cd-rom on the remote |
compouter and run the agent setup.
other wise you could run the .msi from
\\<mgmtsrv>\c$\program files\Microsoft Operations Manager 2005\x86
--
Greetz,
Arie
This posting is provide "AS IS" with no guarantees, warranties, rigths
etc. |
|
| Back to top |
|
|
Shahin
Guest
|
| Posted:
Fri Nov 04, 2005 5:51 pm Post subject:
Re: Useing MOM workgroup between Domains. |
|
|
Hi Arie,
Thans for your reply,
Do i need some kind of trust between the 2 domains?or this is not Necessary?
if it is not necessery how should the manegment server knows about the
server with the agent?
Thanks.
Shahin
thanks,
Shahin.
"Arie de Haan" schreef:
| Quote: | In article <A7C0E2F1-E440-47B0-8FDB-BCCEDB89C4AA@microsoft.com>,
Shahin@discussions.microsoft.com says...
have a questions.
I have installed MOM 2005 and want to install an agent on a server that is
not in the current domain where MOM was installed.
Example:
MOM Installed on a server (single server installation) on domain1 (Windows
2003 Server with latest service packs).
Agent need to be installed on server that is on domain2 (windows 2003 Server
with latest service packs).
The user that I am using is having the administrator level permissions on
both the servers.
When I install the agents in the same domain (in my case domain1), they get
installed successfully. On installation of agent on server that is on domain2
I get the following error
The MOM Server failed to install agent on remote computer <computername>.
Error Code: -2147467259
Error Description: The Agent could not contact the MOM Server.
Microsoft Installer Error Description: No Description Available
There is no firewall between the computers.
how should i do this?
Thanks,
Shahin
Try making it a manual install, so use the MOM cd-rom on the remote
compouter and run the agent setup.
other wise you could run the .msi from
\\<mgmtsrv>\c$\program files\Microsoft Operations Manager 2005\x86
--
Greetz,
Arie
This posting is provide "AS IS" with no guarantees, warranties, rigths
etc.
|
|
|
| Back to top |
|
|
Arie de Haan
Guest
|
| Posted:
Fri Nov 04, 2005 5:51 pm Post subject:
Re: Useing MOM workgroup between Domains. |
|
|
In article <EF46687F-9D58-4C1D-9096-578E829DD671@microsoft.com>,
Shahin@discussions.microsoft.com says...
| Quote: | Hi Arie,
Thans for your reply,
Do i need some kind of trust between the 2 domains?or this is not Necessary?
if it is not necessery how should the manegment server knows about the
server with the agent?
Thanks.
Shahin
thanks,
Shahin.
"Arie de Haan" schreef:
In article <A7C0E2F1-E440-47B0-8FDB-BCCEDB89C4AA@microsoft.com>,
Shahin@discussions.microsoft.com says...
have a questions.
I have installed MOM 2005 and want to install an agent on a server that is
not in the current domain where MOM was installed.
Example:
MOM Installed on a server (single server installation) on domain1 (Windows
2003 Server with latest service packs).
Agent need to be installed on server that is on domain2 (windows 2003 Server
with latest service packs).
The user that I am using is having the administrator level permissions on
both the servers.
When I install the agents in the same domain (in my case domain1), they get
installed successfully. On installation of agent on server that is on domain2
I get the following error
The MOM Server failed to install agent on remote computer <computername>.
Error Code: -2147467259
Error Description: The Agent could not contact the MOM Server.
Microsoft Installer Error Description: No Description Available
There is no firewall between the computers.
how should i do this?
Thanks,
Shahin
Try making it a manual install, so use the MOM cd-rom on the remote
compouter and run the agent setup.
other wise you could run the .msi from
\\<mgmtsrv>\c$\program files\Microsoft Operations Manager 2005\x86
--
Greetz,
Arie
This posting is provide "AS IS" with no guarantees, warranties, rigths
etc.
It is not necessary, check out the deploymewnt guide for manual agent |
deployement and untrusted environments (chapter 7)
--
Greetz,
Arie
This posting is provide "AS IS" with no guarantees, warranties, rigths
etc. |
|
| Back to top |
|
|
Shahin
Guest
|
| Posted:
Sat Nov 05, 2005 5:50 pm Post subject:
Re: Useing MOM workgroup between Domains. |
|
|
Hi Arie,
I have one more qestion, is it also possible that i use the mom between 2
forest as wel?
"Arie de Haan" schreef:
| Quote: | In article <EF46687F-9D58-4C1D-9096-578E829DD671@microsoft.com>,
Shahin@discussions.microsoft.com says...
Hi Arie,
Thans for your reply,
Do i need some kind of trust between the 2 domains?or this is not Necessary?
if it is not necessery how should the manegment server knows about the
server with the agent?
Thanks.
Shahin
thanks,
Shahin.
"Arie de Haan" schreef:
In article <A7C0E2F1-E440-47B0-8FDB-BCCEDB89C4AA@microsoft.com>,
Shahin@discussions.microsoft.com says...
have a questions.
I have installed MOM 2005 and want to install an agent on a server that is
not in the current domain where MOM was installed.
Example:
MOM Installed on a server (single server installation) on domain1 (Windows
2003 Server with latest service packs).
Agent need to be installed on server that is on domain2 (windows 2003 Server
with latest service packs).
The user that I am using is having the administrator level permissions on
both the servers.
When I install the agents in the same domain (in my case domain1), they get
installed successfully. On installation of agent on server that is on domain2
I get the following error
The MOM Server failed to install agent on remote computer <computername>.
Error Code: -2147467259
Error Description: The Agent could not contact the MOM Server.
Microsoft Installer Error Description: No Description Available
There is no firewall between the computers.
how should i do this?
Thanks,
Shahin
Try making it a manual install, so use the MOM cd-rom on the remote
compouter and run the agent setup.
other wise you could run the .msi from
\\<mgmtsrv>\c$\program files\Microsoft Operations Manager 2005\x86
--
Greetz,
Arie
This posting is provide "AS IS" with no guarantees, warranties, rigths
etc.
It is not necessary, check out the deploymewnt guide for manual agent
deployement and untrusted environments (chapter 7)
--
Greetz,
Arie
This posting is provide "AS IS" with no guarantees, warranties, rigths
etc.
|
|
|
| Back to top |
|
|
David Tyra
Guest
|
| Posted:
Sun Nov 06, 2005 9:50 am Post subject:
Re: Useing MOM workgroup between Domains. |
|
|
Shahin,
This is possible as well, although you should pay attention to the notes
about using MOM in a disjointed DNS namespace if these two forest are not in
a contiguous namespace.
Regards,
David Tyra
"Shahin" <Shahin@discussions.microsoft.com> wrote in message
news:92A3D989-84D4-4260-9819-9727919018A1@microsoft.com...
| Quote: | Hi Arie,
I have one more qestion, is it also possible that i use the mom between 2
forest as wel?
"Arie de Haan" schreef:
In article <EF46687F-9D58-4C1D-9096-578E829DD671@microsoft.com>,
Shahin@discussions.microsoft.com says...
Hi Arie,
Thans for your reply,
Do i need some kind of trust between the 2 domains?or this is not
Necessary?
if it is not necessery how should the manegment server knows about the
server with the agent?
Thanks.
Shahin
thanks,
Shahin.
"Arie de Haan" schreef:
In article <A7C0E2F1-E440-47B0-8FDB-BCCEDB89C4AA@microsoft.com>,
Shahin@discussions.microsoft.com says...
have a questions.
I have installed MOM 2005 and want to install an agent on a server
that is
not in the current domain where MOM was installed.
Example:
MOM Installed on a server (single server installation) on domain1
(Windows
2003 Server with latest service packs).
Agent need to be installed on server that is on domain2 (windows
2003 Server
with latest service packs).
The user that I am using is having the administrator level
permissions on
both the servers.
When I install the agents in the same domain (in my case domain1),
they get
installed successfully. On installation of agent on server that is
on domain2
I get the following error
The MOM Server failed to install agent on remote computer
computername>.
Error Code: -2147467259
Error Description: The Agent could not contact the MOM Server.
Microsoft Installer Error Description: No Description Available
There is no firewall between the computers.
how should i do this?
Thanks,
Shahin
Try making it a manual install, so use the MOM cd-rom on the remote
compouter and run the agent setup.
other wise you could run the .msi from
\\<mgmtsrv>\c$\program files\Microsoft Operations Manager 2005\x86
--
Greetz,
Arie
This posting is provide "AS IS" with no guarantees, warranties,
rigths
etc.
It is not necessary, check out the deploymewnt guide for manual agent
deployement and untrusted environments (chapter 7)
--
Greetz,
Arie
This posting is provide "AS IS" with no guarantees, warranties, rigths
etc.
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in