Windows Server

Owen Williams · Guest

Simon:

You're welcome!

I assume when you say "I have RADIUS working authenticating against
domain usernames" that you were successful specifying EAP-MSCHAPv2
(i.e., username/password) in the remote access policy rather than EAP-
TLS (certificates)? If you meant something else, please advise.

I see Andrew provided a suggestion for the certificate issue. Let us
know whether that worked.

-- Owen

In article <u7Jq3HB5FHA.3292@tk2msftngp13.phx.gbl>, newbie@hotmail.com
says...

Newbie · Guest

Owen,

That's correct. I just got the certificate service installed and I'll see
if I can get it to work. I'm just updating SBS2003 to SP1 and I'll upgrade
ISA from 2000 to 2004. Hope it'll go smoothly.

Thanks,

Simon

"Owen Williams" <Owen@NoSpam_CVTCLLC.com> wrote in message
news:MPG.1ddbd140fafb4c0f9896be@news.microsoft.com...

Newbie · Guest

With my Linksys wireless router, I have the following options but I'm not
sure which one to pick for authentication. My tabletPC - Toshiba 3500
doesn't support WPA. I also tried setting up a group policy for Zero
Wireless Configuration and there's a setting for WEP but it doesn't allow me
to enter a WEP key. Any help is much appreciated,

Simon

Here's what I can pick for "Wireless Security" for the Linksys wireless
router:

WPA Pre-Shared Key: There are two encryption options for WPA Pre-Shared Key,
TKIP and AES. TKIP stands for Temporal Key Integrity Protocol. TKIP utilizes
a stronger encrytption method and incorporates Message Integrity Code (MIC)
to provide protection against hackers. AES stands for Advanced Encryption
System, which utilizes a symmetric 128-Bit block data encryption.

To use WPA Pre-Shared Key, enter a password in the WPA Shared Key field
between 8 and 63 characters long. You may also enter a Group Key Renewal
Interval time between 0 and 99,999 seconds.

WPA RADIUS: WPA RADIUS uses an external RADIUS server to perform user
authentication. To use WPA RADIUS, enter the IP address of the RADIUS
server, the RADIUS Port (default is 1812) and the shared secret from the
RADIUS server.

RADIUS: RADIUS utilizes either a RADIUS server for authentication or WEP for
data encryption. To utilize RADIUS, enter the IP address of the RADIUS
server and its shared secret. Select the desired encryption bit (64 or 128)
for WEP and enter either a passphrase or a manual WEP key.

WEP: There are two levels of WEP encryption, 64-bit and 128-bit. The higher
the encryption bit, the more secure your network, however, speed is
sacrificed at higher bit levels. To utilize WEP, select the desired
encryption bit, and enter a passphrase or a WEP key in hexadecimal format.

"Newbie" <newbie@hotmail.com> wrote in message
news:uPXfq5Z5FHA.2484@TK2MSFTNGP09.phx.gbl...

	Windows Server Forum Index -> Small Business Server 2003	All times are GMT Goto page Previous 1, 2
Page 2 of 2