| Author |
Message |
swallace
Guest
|
 Posted:
Wed Oct 26, 2005 8:23 am Post subject:
Old school site needs a littel help till HIS in installed |
|
|
I have an SNA 4 SP4 server that is giving a lot of event ID 108 errors.
We will migrate to HIS 200x in the near future, untill then I need some SNA
4 tips.
I want to re-service pack SNA but am leary that it will overwrite the
current environment and have to re-config the whole thing. Any input would be
helpful.
---SNA Newbie |
|
| Back to top |
|
 |
Neil Pike
Guest
|
| Posted:
Wed Oct 26, 2005 12:51 pm Post subject:
Re: Old school site needs a littel help till HIS in installe |
|
|
Hi - you can happily re-apply SP4 to an SNA Server. I've done that several
times when files have become lost/corrupted/whatever. It won't damage or amend
the configuration.
It's always a good idea to have a backup of the config anyway - which is just
the com.cfg file.
Probably though your 108 errors won't be helped if you already have SP4 applied.
It's likely there is some sort of network issue between the SNA Server and the
mainframe, or internally within VTAM on the mainframe, that's giving you these
errors.
| Quote: | I have an SNA 4 SP4 server that is giving a lot of event ID 108 errors.
We will migrate to HIS 200x in the near future, untill then I need some SNA
4 tips.
I want to re-service pack SNA but am leary that it will overwrite the
current environment and have to re-config the whole thing. Any input would be
helpful.
|
Neil Pike. Protech Computing Ltd
Microsoft SNA/HIS MVP |
|
| Back to top |
|
|
Charles Ezzell (MSFT)
Guest
|
| Posted:
Wed Oct 26, 2005 8:51 pm Post subject:
Re: Old school site needs a littel help till HIS in installe |
|
|
In addition to what Neil stated, have you changed your emulator? I've seen
some emulators cause the 108's in the past.
--
HTH,
Charles Ezzell
Microsoft
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
"Neil Pike" <neilpike@compuserve.com> wrote in message
news:VA.0000635e.1edbd12f@compuserve.com...
| Quote: | Hi - you can happily re-apply SP4 to an SNA Server. I've done that
several
times when files have become lost/corrupted/whatever. It won't damage or
amend
the configuration.
It's always a good idea to have a backup of the config anyway - which is
just
the com.cfg file.
Probably though your 108 errors won't be helped if you already have SP4
applied.
It's likely there is some sort of network issue between the SNA Server and
the
mainframe, or internally within VTAM on the mainframe, that's giving you
these
errors.
I have an SNA 4 SP4 server that is giving a lot of event ID 108 errors.
We will migrate to HIS 200x in the near future, untill then I need some
SNA
4 tips.
I want to re-service pack SNA but am leary that it will overwrite the
current environment and have to re-config the whole thing. Any input
would be
helpful.
Neil Pike. Protech Computing Ltd
Microsoft SNA/HIS MVP
|
|
|
| Back to top |
|
|
Stephen Jackson [MSFT]
Guest
|
| Posted:
Wed Oct 26, 2005 8:51 pm Post subject:
Re: Old school site needs a littel help till HIS in installe |
|
|
The following article explains one known cause of the Event 108 that was
fixed in SNA Server 4.0 SP4:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;275709
When these are reported it usually turns out they are caused by some sort of
network or communciation problem as Neil mentioned.
--
Stephen Jackson
Microsoft® SNA/HIS Support
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only. This posting is provided "AS IS"
with no warranties, and confers no rights.
"Neil Pike" <neilpike@compuserve.com> wrote in message
news:VA.0000635e.1edbd12f@compuserve.com...
| Quote: | Hi - you can happily re-apply SP4 to an SNA Server. I've done that
several
times when files have become lost/corrupted/whatever. It won't damage or
amend
the configuration.
It's always a good idea to have a backup of the config anyway - which is
just
the com.cfg file.
Probably though your 108 errors won't be helped if you already have SP4
applied.
It's likely there is some sort of network issue between the SNA Server and
the
mainframe, or internally within VTAM on the mainframe, that's giving you
these
errors.
I have an SNA 4 SP4 server that is giving a lot of event ID 108 errors.
We will migrate to HIS 200x in the near future, untill then I need some
SNA
4 tips.
I want to re-service pack SNA but am leary that it will overwrite the
current environment and have to re-config the whole thing. Any input
would be
helpful.
Neil Pike. Protech Computing Ltd
Microsoft SNA/HIS MVP
|
|
|
| Back to top |
|
|
swallace
Guest
|
| Posted:
Thu Oct 27, 2005 8:51 pm Post subject:
Re: Old school site needs a littel help till HIS in installe |
|
|
Stephen, That's probably the last reference to SNA on MSs site. I tried to
obtain SP4 and it's not availavle anymore.
"Stephen Jackson [MSFT]" wrote:
| Quote: | The following article explains one known cause of the Event 108 that was
fixed in SNA Server 4.0 SP4:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;275709
When these are reported it usually turns out they are caused by some sort of
network or communciation problem as Neil mentioned.
--
Stephen Jackson
Microsoft® SNA/HIS Support
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only. This posting is provided "AS IS"
with no warranties, and confers no rights.
"Neil Pike" <neilpike@compuserve.com> wrote in message
news:VA.0000635e.1edbd12f@compuserve.com...
Hi - you can happily re-apply SP4 to an SNA Server. I've done that
several
times when files have become lost/corrupted/whatever. It won't damage or
amend
the configuration.
It's always a good idea to have a backup of the config anyway - which is
just
the com.cfg file.
Probably though your 108 errors won't be helped if you already have SP4
applied.
It's likely there is some sort of network issue between the SNA Server and
the
mainframe, or internally within VTAM on the mainframe, that's giving you
these
errors.
I have an SNA 4 SP4 server that is giving a lot of event ID 108 errors.
We will migrate to HIS 200x in the near future, untill then I need some
SNA
4 tips.
I want to re-service pack SNA but am leary that it will overwrite the
current environment and have to re-config the whole thing. Any input
would be
helpful.
Neil Pike. Protech Computing Ltd
Microsoft SNA/HIS MVP
|
|
|
| Back to top |
|
|
swallace
Guest
|
| Posted:
Thu Oct 27, 2005 8:51 pm Post subject:
Re: Old school site needs a littel help till HIS in installe |
|
|
Thanks Charles. Nothing has changed with the SNA server nor the emulator used
by the clients. It is being used for a web based interface based on Siemens
Architecture. Netaccess is a web front end for clinical/patient care.
I just need to ferret out the communication error.
"Charles Ezzell (MSFT)" wrote:
| Quote: | In addition to what Neil stated, have you changed your emulator? I've seen
some emulators cause the 108's in the past.
--
HTH,
Charles Ezzell
Microsoft
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
"Neil Pike" <neilpike@compuserve.com> wrote in message
news:VA.0000635e.1edbd12f@compuserve.com...
Hi - you can happily re-apply SP4 to an SNA Server. I've done that
several
times when files have become lost/corrupted/whatever. It won't damage or
amend
the configuration.
It's always a good idea to have a backup of the config anyway - which is
just
the com.cfg file.
Probably though your 108 errors won't be helped if you already have SP4
applied.
It's likely there is some sort of network issue between the SNA Server and
the
mainframe, or internally within VTAM on the mainframe, that's giving you
these
errors.
I have an SNA 4 SP4 server that is giving a lot of event ID 108 errors.
We will migrate to HIS 200x in the near future, untill then I need some
SNA
4 tips.
I want to re-service pack SNA but am leary that it will overwrite the
current environment and have to re-config the whole thing. Any input
would be
helpful.
Neil Pike. Protech Computing Ltd
Microsoft SNA/HIS MVP
|
|
|
| Back to top |
|
|
Charles Ezzell (MSFT)
Guest
|
| Posted:
Fri Oct 28, 2005 12:51 am Post subject:
Re: Old school site needs a littel help till HIS in installe |
|
|
sna4sp4 can be downloaded here:
http://www.microsoft.com/technet/archive/sna/downloads/sna4sp4.mspx
--
HTH,
Charles Ezzell
Microsoft
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
"swallace" <swallace@discussions.microsoft.com> wrote in message
news:811830A7-5235-48A9-8AC4-68F2ABCF8EDD@microsoft.com...
| Quote: | Stephen, That's probably the last reference to SNA on MSs site. I tried to
obtain SP4 and it's not availavle anymore.
"Stephen Jackson [MSFT]" wrote:
The following article explains one known cause of the Event 108 that was
fixed in SNA Server 4.0 SP4:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;275709
When these are reported it usually turns out they are caused by some sort
of
network or communciation problem as Neil mentioned.
--
Stephen Jackson
Microsoft® SNA/HIS Support
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only. This posting is provided "AS IS"
with no warranties, and confers no rights.
"Neil Pike" <neilpike@compuserve.com> wrote in message
news:VA.0000635e.1edbd12f@compuserve.com...
Hi - you can happily re-apply SP4 to an SNA Server. I've done that
several
times when files have become lost/corrupted/whatever. It won't damage
or
amend
the configuration.
It's always a good idea to have a backup of the config anyway - which
is
just
the com.cfg file.
Probably though your 108 errors won't be helped if you already have SP4
applied.
It's likely there is some sort of network issue between the SNA Server
and
the
mainframe, or internally within VTAM on the mainframe, that's giving
you
these
errors.
I have an SNA 4 SP4 server that is giving a lot of event ID 108
errors.
We will migrate to HIS 200x in the near future, untill then I need
some
SNA
4 tips.
I want to re-service pack SNA but am leary that it will overwrite the
current environment and have to re-config the whole thing. Any input
would be
helpful.
Neil Pike. Protech Computing Ltd
Microsoft SNA/HIS MVP
|
|
|
| Back to top |
|
|
Charles Ezzell (MSFT)
Guest
|
| Posted:
Fri Oct 28, 2005 12:51 am Post subject:
Re: Old school site needs a littel help till HIS in installe |
|
|
I thought all the Siemen's stuff had been upgraded by now <G>.
If the software or hardware had not changed, I would start looking at the
network to see if any changes had been made lately. Also, see my other email
regarding the sna4sp4 location.
--
HTH,
Charles Ezzell
Microsoft
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
"swallace" <swallace@discussions.microsoft.com> wrote in message
news:45EE982F-7FBB-46F9-9496-DD8C4502F82B@microsoft.com...
| Quote: | Thanks Charles. Nothing has changed with the SNA server nor the emulator
used
by the clients. It is being used for a web based interface based on
Siemens
Architecture. Netaccess is a web front end for clinical/patient care.
I just need to ferret out the communication error.
"Charles Ezzell (MSFT)" wrote:
In addition to what Neil stated, have you changed your emulator? I've
seen
some emulators cause the 108's in the past.
--
HTH,
Charles Ezzell
Microsoft
This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of any included samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
"Neil Pike" <neilpike@compuserve.com> wrote in message
news:VA.0000635e.1edbd12f@compuserve.com...
Hi - you can happily re-apply SP4 to an SNA Server. I've done that
several
times when files have become lost/corrupted/whatever. It won't damage
or
amend
the configuration.
It's always a good idea to have a backup of the config anyway - which
is
just
the com.cfg file.
Probably though your 108 errors won't be helped if you already have SP4
applied.
It's likely there is some sort of network issue between the SNA Server
and
the
mainframe, or internally within VTAM on the mainframe, that's giving
you
these
errors.
I have an SNA 4 SP4 server that is giving a lot of event ID 108
errors.
We will migrate to HIS 200x in the near future, untill then I need
some
SNA
4 tips.
I want to re-service pack SNA but am leary that it will overwrite the
current environment and have to re-config the whole thing. Any input
would be
helpful.
Neil Pike. Protech Computing Ltd
Microsoft SNA/HIS MVP
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in