| Author |
Message |
Johnny Rio
Guest
|
 Posted:
Fri Oct 14, 2005 8:50 pm Post subject:
Can't join domain of DC server |
|
|
I have a simple network....2 servers (1 DC and 1 file server). I've created
my DC and thought I had everything setup right but when I try to connect my
file server to the DC I get a timeout error that only took about 5 seconds.
I've read several articles including Q237675, Q324259, and Q324753 but still
no luck. Maybe my forward and reverse lookup zones aren't setup correctly.
When I type nslookup on my DC I do get the message that the default server is
not set. When I type Server SERVER3, I get the info of my domain and IP
address. How do I get this info to "stick".
My domain is agency.city.local
My IP is 192.168.24.3 (SERVER3)
My only entry in my File servers primary DNS settings is 192.168.24.3. What
am I missing?
Thanks,
Johnny |
|
| Back to top |
|
 |
Kevin D. Goodknecht Sr. [
Guest
|
| Posted:
Sat Oct 15, 2005 7:49 am Post subject:
Re: Can't join domain of DC server |
|
|
Johnny Rio <JohnnyRio@discussions.microsoft.com> wrote:
| Quote: | I have a simple network....2 servers (1 DC and 1 file server). I've
created my DC and thought I had everything setup right but when I try
to connect my file server to the DC I get a timeout error that only
took about 5 seconds. I've read several articles including Q237675,
Q324259, and Q324753 but still no luck. Maybe my forward and reverse
lookup zones aren't setup correctly. When I type nslookup on my DC I
do get the message that the default server is not set. When I type
Server SERVER3, I get the info of my domain and IP address. How do I
get this info to "stick".
|
What do you mean by "Stick"
| Quote: |
My domain is agency.city.local
My IP is 192.168.24.3 (SERVER3)
My only entry in my File servers primary DNS settings is
192.168.24.3. What am I missing?
|
Run netdiag /fix on the DC, the run netdiag /test:dns /v and post your
errors.
--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
https://secure.lsaol.com/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
=================================== |
|
| Back to top |
|
|
Johnny Rio
Guest
|
| Posted:
Mon Oct 17, 2005 8:50 pm Post subject:
Re: Can't join domain of DC server |
|
|
I had to install some support tools for Windows Server 2003 so that I could
run the netdiag commands you mentioned. Once I ran the commands and ran
nslookup, my server is registered as Server3 whereas before I could set the
name but each time I exited the CMD prompt and re-ran nslookup, my server's
name was listed as unknown (that's what I meant by "stick").
Here's the results of the netdiag tests.
Gathering IPX configuration information.
Querying status of the Netcard drivers... Passed
Testing Domain membership... Passed
Gathering NetBT configuration information.
Testing DNS
PASS - All the DNS entries for DC are registered on DNS server
'192.168.24.3'.
Tests complete.
Computer Name: SERVER3
DNS Host Name: SERVER3.agency.city.local
DNS Domain Name: agency.city.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
Hotfixes :
Installed? Name
Yes KB890046
Yes KB893756
Yes KB896358
Yes KB896422
Yes KB896428
Yes KB896727
Yes KB898715
Yes KB898792
Yes KB899587
Yes KB899588
Yes KB899591
Yes KB901214
Yes Q147222
Netcard queries test . . . . . . . : Passed
Information of Netcard drivers:
---------------------------------------------------------------------------
Description: Intel(R) PRO/1000 MT Network Connection
Device: \DEVICE\{1CE3E17A-7DD3-4678-8F9B-7EA9CA49136B}
Media State: Connected
Device State: Connected
Connect Time: 02:51:54
Media Speed: 100 Mbps
Packets Sent: 489
Bytes Sent (Optional): 0
Packets Received: 14755
Directed Pkts Recd (Optional): 482
Bytes Received (Optional): 0
Directed Bytes Recd (Optional): 0
---------------------------------------------------------------------------
[PASS] - At least one netcard is in the 'Connected' state.
Per interface results:
Adapter : Local Area Connection
Adapter ID . . . . . . . . : {1CE3E17A-7DD3-4678-8F9B-7EA9CA49136B}
Netcard queries test . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
Machine is a . . . . . . . . . : Primary Domain Controller Emulator
Netbios Domain name. . . . . . : AGENCY
Dns domain name. . . . . . . . : agency.city.local
Dns forest name. . . . . . . . : agency.city.local
Domain Guid. . . . . . . . . . : {AFDF685F-F0A8-4E97-A0D5-62757E2C323F}
Domain Sid . . . . . . . . . . : S-1-5-21-2184146301-2621240423-1501514961
Logon User . . . . . . . . . . : AGENCY_ADMIN
Logon Domain . . . . . . . . . : AGENCY
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{1CE3E17A-7DD3-4678-8F9B-7EA9CA49136B}
1 NetBt transport currently configured.
DNS test . . . . . . . . . . . . . : Passed
Interface {1CE3E17A-7DD3-4678-8F9B-7EA9CA49136B}
DNS Domain:
DNS Servers: 192.168.24.3
IP Address: Expected registration with PDN (primary DNS
domain name):
Hostname: SERVER3.agency.city.local.
Authoritative zone: agency.city.local.
Primary DNS server: SERVER3.agency.city.local 192.168.24.3
Authoritative NS:192.168.24.3
Check the DNS registration for DCs entries on DNS server '192.168.24.3'
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
The Record is correct on DNS server '192.168.24.3'.
PASS - All the DNS entries for DC are registered on DNS server
'192.168.24.3'.
The command completed successfully
"Kevin D. Goodknecht Sr. [MVP]" wrote:
| Quote: | Johnny Rio <JohnnyRio@discussions.microsoft.com> wrote:
I have a simple network....2 servers (1 DC and 1 file server). I've
created my DC and thought I had everything setup right but when I try
to connect my file server to the DC I get a timeout error that only
took about 5 seconds. I've read several articles including Q237675,
Q324259, and Q324753 but still no luck. Maybe my forward and reverse
lookup zones aren't setup correctly. When I type nslookup on my DC I
do get the message that the default server is not set. When I type
Server SERVER3, I get the info of my domain and IP address. How do I
get this info to "stick".
What do you mean by "Stick"
My domain is agency.city.local
My IP is 192.168.24.3 (SERVER3)
My only entry in my File servers primary DNS settings is
192.168.24.3. What am I missing?
Run netdiag /fix on the DC, the run netdiag /test:dns /v and post your
errors.
--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
https://secure.lsaol.com/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
===================================
|
|
|
| Back to top |
|
|
Kevin D. Goodknecht Sr. [
Guest
|
| Posted:
Tue Oct 18, 2005 8:32 am Post subject:
Re: Can't join domain of DC server |
|
|
Johnny Rio <JohnnyRio@discussions.microsoft.com> wrote:
| Quote: | I had to install some support tools for Windows Server 2003 so that I
could run the netdiag commands you mentioned. Once I ran the
commands and ran nslookup, my server is registered as Server3 whereas
before I could set the name but each time I exited the CMD prompt and
re-ran nslookup, my server's name was listed as unknown (that's what
I meant by "stick").
|
Do you mean nslookup said "Can't find server name for address
<DNSIPAddress>"
That is nslookup doing a reverse lookup on the DNS server IP, create a
reverse lookup zone and PTR record.
--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
https://secure.lsaol.com/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
=================================== |
|
| Back to top |
|
|
Kevin D. Goodknecht Sr. [
Guest
|
| Posted:
Wed Oct 19, 2005 12:50 am Post subject:
Re: Can't join domain of DC server |
|
|
Johnny Rio <JohnnyRio@discussions.microsoft.com> wrote:
| Quote: | nslookup appears to be working just fine now. The zone and PTR record
exists.
I didn't realize DHCP must be enabled. After I authorized DHCP, it is
showing in my list of services as started, when I type ipconfig /all
it says that DHCP Enabled = No.
|
The DHCP client service must be enabled. As for the ipconfig /all, it means
you have a statically assigned IP address.
--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
https://secure.lsaol.com/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
=================================== |
|
| Back to top |
|
|
Johnny Rio
Guest
|
| Posted:
Wed Oct 19, 2005 12:50 am Post subject:
Re: Can't join domain of DC server |
|
|
nslookup appears to be working just fine now. The zone and PTR record
exists.
I didn't realize DHCP must be enabled. After I authorized DHCP, it is
showing in my list of services as started, when I type ipconfig /all it says
that DHCP Enabled = No.
"Kevin D. Goodknecht Sr. [MVP]" wrote:
| Quote: | Johnny Rio <JohnnyRio@discussions.microsoft.com> wrote:
I had to install some support tools for Windows Server 2003 so that I
could run the netdiag commands you mentioned. Once I ran the
commands and ran nslookup, my server is registered as Server3 whereas
before I could set the name but each time I exited the CMD prompt and
re-ran nslookup, my server's name was listed as unknown (that's what
I meant by "stick").
Do you mean nslookup said "Can't find server name for address
DNSIPAddress>"
That is nslookup doing a reverse lookup on the DNS server IP, create a
reverse lookup zone and PTR record.
--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
https://secure.lsaol.com/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
===================================
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in