Edgar Polanco
Guest
|
 Posted:
Fri Oct 07, 2005 8:51 pm Post subject:
Re: Change node type for IP-DLC HIS2004 |
|
|
Hi guys,
I took a trace from the Switching Information Segment,
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/D50A5006/2.8.6?DT=20000908141935
Bad case(HIS 2004 Server),
0E14 00001B830A000000 05B50000EA600000 00B4066704008005 0567030090001685
Good case,
0E14 00001683A8000000 05B50000EA600000 00B406670400800A 00001C85
There are several issues involved here. Firstable, as seen on the Good case and on the SNA Formats as well, the pad bytes are missing in the HIS' data.
http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/D50A5006/2.7?DT=20000908141935
........
All RTP segments and CVs always begin on a word (4-byte aligned) boundary. RTP segments are always a multiple of four bytes in length (using ending pad bytes if necessary to achieve this). In order to align segments and CVs on word boundaries, reserved or pad bytes (X'00') are used as follows: .......
Furthermore, there are two ANR Path (67x) control vectors(cv) on the Switching Information (83x) cv, when only one is needed.http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/D50A5006/2.8.6.1?DT=20000908141935
In the case that several ANR Label entries are needed (for instance, when there are intermmediate nodes), these entries should be all embedded in a single CV67. http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/D50A5006/9.3.2..96?DT=20000908141935
IHV UDP data => (port 12001)
IHV DSAP=04, SSAP=04, CTRL=03 (UI) CMD, LEN=360
IHV 040403c6 00a400ff 00800000 00010000
IHV 007c0c00 2f000000 a3000000 00240580
IHV 000a03e4 e2c9c2d4 e9d7f300 000800d7
IHV d6d3c5c4 c7032680 000639a3 85344300
IHV 000d0d01 01980000 000a2800 c3d7e2e5
IHV c3d4c700 000a03e4 e2c9c2d4 e9d7f300
IHV 000a00d9 c3c8d3d7 f6f0f800 00063900
IHV 00005800 000f1400 001b830a 00000005
IHV b50000ea 60000000 b4066704 00800c05
IHV 67030090 001a8500 01164614 80010fe4
IHV e2c9c2d4 e9d7f34b d7d6d3c5 c4c72100
IHV 00052201 00000042 68000090 88000180
IHV 00000000 0c5d0080 01800002 00000000
IHV 006b8000 31001307 b0b050b3 07879797
IHV 87070602 00000000 00004014 2300000f
IHV e4e2c9c2 d4e9d7f3 4bd7d6d3 c5c4c730
Since these incorrect data could generate problems in the SNA Network, I'd like you to tell me how can I request a fix from your side (Microsoft) to correct these problems.
Regards and thank you in advance,
Edgar Polanco
IBM SNA Communication Team
"Charles Ezzell (MSFT)" <charliee@online.microsoft.com> wrote in message news:ubwBAXCxFHA.3400@TK2MSFTNGP14.phx.gbl...
| Quote: | Edgar,
You are going to need to open a case with Microsoft's Product Support team.
I suspect this is nothing but a configuration problem. The guide I mentioned
earlier is what is needed to be setup on both our end and the host end, and
any changes could break things. That said, we are going to need to see the
following from you:
1) Change the default audit log level (subdomain properties) from
"significant" to "general information messages". This will log more
information from the link service. Then repro the problems with the new
settings.
2) Application Internal message, API, LU6.2 traces. We will need to see the
actual ATF files.
3) from the Diagnostic tool, click the IP-DLC tab and click status. It will
automatically save a file in your traces directory (this fires off the tool
to dump information about your ip-dlc link(s) installed on the box). No need
to enter a server name on this tab, it defaults to the local server.
4) Event logs (application and system) saved in EVT format. These are very
important, especially after doing #1 above. Word of warning: If you don't do
#1, then the event logs are useless and you will be asked to get them again
vbg>.
5) Com.cfg file
If the above doesn't give us enough to go on, we would need additional
tracing on the link service. However, for IP-DLC this is in a different
format than other traces, so let's not worry about that for now. Event logs
and the output from qryipdlc.exe (using the diag tool as a front end in step
#3 above) should give us a good idea on what is wrong.
--
HTH,
Charles Ezzell
Microsoft
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of any included samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
"Edgar Polanco" <poledg@hotmail.com> wrote in message
news:uqz6yx9wFHA.2792@tk2msftngp13.phx.gbl...
Hi guys,
Firstable, Thanks for the great help!!
Well, i'm getting more information,
From the appc trace,
APPC Type:Sync VerbID:00014000
APPC ---- Verb Parameter Block at address 0006A248 ----
APPC 01000000 00030000 00000004 00000000 <................
AP_M_ALLOCATE APPC_FLIPI(0x0100) /* X'0100'
APPC Primary return code = 0x003(AP_ALLOCATION_ERROR)
APPC Secondary Return Code: 0x00000004 (AP_ALLOCATION_FAILURE_NO_RETRY)
I also got different traces,
Calling routing proc 0 at address 67435A78, status 1
rc after call to routproc 0
Calling routing proc 1 at address 6101BF64, status 1
srci:0x0000 desti:0x0001. msgtype=1, opentype=36, openqual=3
destl+i: 13,1 srcl+i 5,0
Lcrcb TPCB:002372F8 RCB:002373F0
ENTER: tpcb 0x2372F8, rcb 0x2373F0 Message received: srcp 0x02, srci
0x0000,
destp 0x00, desti 0x0001
LU62CONN: set rcb destp and desti
rcb: destl = 0x05, destp = 0x02, desti = 0x0000
tpcb: destl = 0x00, destp = 0x11 desti = 0x0000
Found Original Message: previous best destl = 0x05
LU62 CONNECTION: Error Rsp
retcode,operr2,retqual: Current 0x0000000F, 0x0003, 0x00. Previous
0x00000000, 0xFFFFF004, 0x00
This error is the 'least worst' error so far
Free header at 0x0162492c
Releasing buffer 0162492C
ENTER: TPCB 002372F8 RCB 002373F0 (tp scrl = 0x00)
call sbpdfind for tpcb 0x2372F8 rcb 0x2373F0
Resloc type 0, Flags 0h, UpperLimit 4094
PVI 00000001->05110000 OPEN LU62 REQUEST
PVI
PVI ---- Header at address 0162492C, 2 elements ----
PVI 0124B006 00000000 00001800 0100C009 <.$..............
PVI
PVI ---- Element at address 020170F4, start 1, end 81 ----
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 01000000 00000102 504F4C45 <............POLE
PVI 44472020 XXXXXXXXXXXX 7BC9D5E3 <DG XXXXXX{INT
PVI C5D94040 00000000 00000000 00000000 <ER@@............
PVI 00000000 00000000 00000000 00000000 <................
PVI 01 <.
PVI
PVI ---- Element at address 0201733C, start 1, end 127 ----
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 000000 <...............
I ----------------------------------------------------------------------
----------
PVI 05020000->0D000001 OPEN LU62 RSP ERROR
PVI Err1:0000 Err2:0003
PVI
PVI ---- Header at address 0162492C, 2 elements ----
PVI 0324B006 00000000 00031800 01006C0A <.$............l.
PVI
PVI ---- Element at address 020170F4, start 1, end 81 ----
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 010F0000 00000102 504F4C45 <............POLE
PVI 44472020 XXXXXXXXXXXX 23494E54 <DG XXXXXX#INT
PVI 45522020 00000000 00000000 00000000 <ER ............
PVI 00000000 00000000 00000000 00000000 <................
PVI 01 <.
PVI
PVI ---- Element at address 0201733C, start 1, end 89 ----
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 00000000 <................
PVI 00000000 00000000 00000000 00140BC1 <...............A
PVI D7D7D54B D7D6D3C5 C4C707D5 8D7FA3C9 <PPNKPOLEDG.N.tI
PVI 00010000 00000000 00000000 00000000 <................
PVI 00000000 00050800 00 <.........
Inbound complete, MsgFound = 1, status = 1, DestL = 13, SrcL = 5, msg > > 014D492C
Call AsyncSepdveluSID with no SIDs
APPC LU access validation
Security is OFF - don't make RPC
MangleLPIs in from an App
Im also getting several Events,
Event ID: 545
ISR session failure because of link outage or error
Sense code = 0x80020000
FQPCID = APPN.POLEDG :ff3f0a0b e36924f6
Failing LS name = @R000707
Data:
0000: 53 4e 41 49 50 31 2c 20 SNAIP1,
0008: 31 1
Event ID: 18
Description:
APPC session activation failure: BIND negative response or UNBIND request
received
Sense data = 80020000 (NOTE: 0032xxxx indicates UNBIND received)
Connection = EE22
LU alias = POLEDG
PLU alias = REMOTELU
Mode name = SNASVCMG
Sense data:
8002
Link Failure: Data link failure.
And finally, lots of this event id,
Event ID: 664
Description:
RTP connection has timed-out
Connection name = @R000621
COS = CPSVCMG
Remote node name = REMOTELU
Local TCID = 00000002 6d000000
Remote TCID = 80000000 00000000
Data:
0000: 53 4e 41 49 50 31 2c 20 SNAIP1,
0008: 30 0
Regards and thanks again!!
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in