Tony Tuccillo
Guest
|
 Posted:
Tue Jan 18, 2005 8:45 am Post subject:
SBS Backup Problem |
|
|
Hello,
I am running the built in SBS 2003 backup script that uses NTBACKUP. I
had the below problem for quite some time now. The whole backup appears to
work except for the last step. See log below. Any suggestions people ?
Thanks !
===========================================================
Backup Status
Operation: Backup
Active backup destination: Travan
Media name: "Media created 17/01/2005 at 11:00 PM"
Backup (via shadow copy) of "C: "
Backup set #1 on media #1
Backup description: "SBS Backup created on 17/01/2005 at 11:00 PM"
Media name: "Media created 17/01/2005 at 11:00 PM"
Backup Type: Normal
Backup started on 17/01/2005 at 11:05 PM.
Backup completed on 17/01/2005 at 11:52 PM.
Directories: 2999
Files: 27716
Bytes: 4,741,534,556
Time: 47 minutes and 6 seconds
Backup (via shadow copy) of "E: Data"
Backup set #2 on media #1
Backup description: "SBS Backup created on 17/01/2005 at 11:00 PM"
Media name: "Media created 17/01/2005 at 11:00 PM"
Backup Type: Normal
Backup started on 17/01/2005 at 11:52 PM.
The requested media failed to mount. The operation was aborted.
The operation was ended.
Backup completed on 18/01/2005 at 3:25 AM.
Directories: 2387
Files: 48259
Bytes: 15,802,784,797
Time: 3 hours, 32 minutes, and 43 seconds
----------------------
The operation did not successfully complete. |
|
Eric
Guest
|
| Posted:
Tue Jan 18, 2005 8:45 am Post subject:
Re: SBS Backup Problem |
|
|
Tony,
I had the same problem and I found that my system drive was getting filled
up with shadow copies. Although I had plenty of free space on the tape
drive, the system drive only had about 900Mb on it, so I guess it couldn't
hold whatever it needed to hold which was probably another shadow copy
backup. :> Clean out your old shadow copies from the drives (especially
the C:\ drive) and then "Backup Now" to see if it works. To remove the
shadow copies right click for properties of each drive and choose the Shadow
Copy tab. You can disable, change the size of and/or delete old shadow
copies.
Good luck. Let us know if this fixes it as I've seen many people with
error. I had it myself on two servers.
Eric
"Tony Tuccillo" <TonyTuccillo@discussions.microsoft.com> wrote in message
news:42A19F31-6D01-404D-8461-3E59A2AC1E07@microsoft.com...
| Quote: | Hello,
I am running the built in SBS 2003 backup script that uses NTBACKUP. I
had the below problem for quite some time now. The whole backup appears to
work except for the last step. See log below. Any suggestions people ?
Thanks !
===========================================================
Backup Status
Operation: Backup
Active backup destination: Travan
Media name: "Media created 17/01/2005 at 11:00 PM"
Backup (via shadow copy) of "C: "
Backup set #1 on media #1
Backup description: "SBS Backup created on 17/01/2005 at 11:00 PM"
Media name: "Media created 17/01/2005 at 11:00 PM"
Backup Type: Normal
Backup started on 17/01/2005 at 11:05 PM.
Backup completed on 17/01/2005 at 11:52 PM.
Directories: 2999
Files: 27716
Bytes: 4,741,534,556
Time: 47 minutes and 6 seconds
Backup (via shadow copy) of "E: Data"
Backup set #2 on media #1
Backup description: "SBS Backup created on 17/01/2005 at 11:00 PM"
Media name: "Media created 17/01/2005 at 11:00 PM"
Backup Type: Normal
Backup started on 17/01/2005 at 11:52 PM.
The requested media failed to mount. The operation was aborted.
The operation was ended.
Backup completed on 18/01/2005 at 3:25 AM.
Directories: 2387
Files: 48259
Bytes: 15,802,784,797
Time: 3 hours, 32 minutes, and 43 seconds
----------------------
The operation did not successfully complete.
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in